<color:FFFF22><font:Impact:30>UberFaves
<font:Univers:18><color:FFFFFF>Version: 1.1.2
By: <a:player	UberGuy><spush><color:FFFFFF>UberGuy</a> <color:FFFF22>(FT)<color:FFFF22><spop>
E-Mail: uberguy@tribalwar.com

<spush><font:Univers Bold:16><color:2CACB5>Overview:<spop><color:82BEB9>
This is a twist on T2 loadout favorites management. It allows 30 favorites instead of 20, and lets you group them in sets of 10 with special keybinds.

<spush><font:Univers Bold:16><color:2CACB5>Usage:<spop><color:82BEB9>
This script is configured from inside the Script Browser (if you're reading this you probably know that).

You can access setup GUI the 30 favorites just like you could the normal 20 that T2 ships with. Use the inventory HUD key, and the dropdown will now have a 3rd line for favorites 21-30.

To access the 10 new favorites, you will need to use the "UberFaves Set" keys, described below.

<just:center><font:Univers:12><color:444444>===<color:666666>====<color:999999>=====<color:CCCCCC>======<color:FFFFFF>========<color:CCCCCC>======<color:999999>=====<color:666666>====<color:444444>===

<color:FFFFFF><font:Ariel:22>UberFaves Keybinds<just:left><font:Univers:18><color:82BEB9>

UberFaves adds five new keybinds to the Control tab of the settings display:<lmargin:50>
<color:FFFFFF>
UberFaves Set 1
UberFaves Set 2
UberFaves Set 2
UberFav KeepPack
UberFav KeepGren<lmargin:10><color:82BEB9>

Each of the "Set" keys, when pressed, will change the way the numpad keys 0-9 work. If you press "UberFaves Set 1", the numpad keys 1-9,0 will give you favorites 1-10, respectively. If you press "UberFaves Set 2", numpad 1-9,0 will give you favorites 11-20. And finally, "UberFaves Set 3" will give you favorites 21-30.

It's important to note that you do not lose any binds currently on your numpad numbers. UberFaves only takes them over until you select a favorite, and then they revert to whatever they were bound to before. Moreover, in case you use your numpad keys for something else and don't ever want favorites bound there, UberFaves creates a file called "UberFavesCfg.cs" in the "prefs" directory. In it you'll find definitions for the 10 keys it maps the 10 favorites to. You can edit this file to change the binds. You'll have to restart T2 to have those changes take effect.

KeepPack and KeepGren change the way quick-selected packs and grenades work, respectively. Normally, any quick-select items you choose are reset when you choose a new favorite. Pressing one of the "Keep" keys will toggle this behavior on and off. For example, if most of your light armor loadouts have flares, but you find yourself on an indoor map, you could quick-select normal grenades and toggle on "KeepGrens". Now, no matter what loadout you select it will be given normal grenades. You could then change to concussion grenades and all loadouts would receive those.

These toggle keys echo their status to the chatHUD when pressed. Also, if you're using the Inventory HUD (see below), the text "Pack:" and "Grenade:" for quick-selected items changes from green to red in "Keep" mode.

<just:center><font:Univers:12><color:444444>===<color:666666>====<color:999999>=====<color:CCCCCC>======<color:FFFFFF>========<color:CCCCCC>======<color:999999>=====<color:666666>====<color:444444>===

<color:FFFFFF><font:Ariel:22>UberFaves Options<just:left><font:Univers:18>

<color:EEEEEE>Announce Sets:<color:82BEB9> If you enable this checkbox, UberFaves will announce when you press a "UberFaves Set" keys. The drop down to its right defines three announcement styles.<lmargin:50>

<color:FFFFFF>1-2-3:<color:82BEB9> The script simply says "One", "Two", or "Three", depending on which or the three set keys you press.
<color:FFFFFF>T1-Style:<color:82BEB9> This set assumes you plan on dividing each of your three sets of 10 favorites into light, medium, and heavy armors. It announces "Light", "Medium", and "Heavy", for set 1, 2, and 3, respectively.
<color:FFFFFF>T2-Style:<color:82BEB9> This is just like "T1-Style", above, but instead it says "Scout", "Assault", and "Juggernaut".<lmargin:10>

<color:EEEEEE>Announce Armor:<color:82BEB9> This toggle determines if the script will say what sort of armor you selected for this loadout after you get it. The button to the right determines whether it names the armors T1 or T2 style, just like the "Announce Sets" dropdown above it.

<color:EEEEEE>Announce Grenades:<color:82BEB9> If enabled, UberFaves will say what sort of grenades you got at the inventory.

<color:EEEEEE>Annc. Quick Grens:<color:82BEB9> If enabled, QuickSelected grenade types will be announced.

<color:EEEEEE>Announce Pack:<color:82BEB9> If enabled, UberFaves will say what sort of pack you got at the inventory.

<color:EEEEEE>Annc. Quick Packs:<color:82BEB9> If enabled, QuickSelected pack types will be announced.

<color:EEEEEE>Echo in Chat:<color:82BEB9> Enable this if you want your loadout announced in the Chat HUD, just like normal loadouts are. If you use a script that normally mutes such announcements, this button will have no effect.

<color:EEEEEE>Show Loadout HUD:<color:82BEB9> Display your loadout in a small, HudMover compatible HUD. This HUD will show the name of your selected loadout, and any quick-select pack or grenade that you select.

<color:EEEEEE>Save:<color:82BEB9> Saves your current settings.

<just:center><font:Univers:12><color:444444>===<color:666666>====<color:999999>=====<color:CCCCCC>======<color:FFFFFF>========<color:CCCCCC>======<color:999999>=====<color:666666>====<color:444444>===

<color:FFFFFF><font:Ariel:22>Other Information<just:left><font:Univers:18><color:82BEB9>

It's easy to change or add sounds for UberFaves. The sounds it uses go in the base/Audio/UberFaves directory. Just look inside the vl2 for find the files and their names. The packs and grenades are in the "items" subdirectory. The armors are under the "T1-" and "T2-Style" folders under the "sets" subdirectory. For the key bind sets, you can actually make your own sound sets. Under the /base/audio/UberFaves/sets directory, just make a directory and put three sound files, named "1.wav", "2.wav", and "3.wav". The name of your directory will actually appear in the "Announce Sets" dropdown the next time you start T2, and you can use your new sounds.

<just:center><font:Univers:12><color:444444>===<color:666666>====<color:999999>=====<color:CCCCCC>======<color:FFFFFF>========<color:CCCCCC>======<color:999999>=====<color:666666>====<color:444444>===

<just:left><font:Univers:18><color:82BEB9><spush><font:Univers Bold:16><color:2CACB5>Known Issues/Bugs:<spop><color:82BEB9>
There is no client-side way to know what armor you're wearing. So if you get the wrong armor because of server rules (arena) or because you visited a deployable station, the script will incorrectly announce the armor you requested, not the one you got. So be careful...
